e-CAM30_CUTX1 – 3.4 MP NVIDIA Jetson TX1 Camera Board

e-CAM30_cutx1

e-con systems announces the launch of e-CAM30_CUTX1, 3.4 Megapixel 4 lane MIPI CSI-2 board for Nvidia Jetson Tegra X1 kit.  This camera is based on 1/3 inch AR0330 CMOS Image sensor from ON Semiconductor with 2.2 µm pixel and A-Pix technology. It enables an excellent low-light performance and can capture good quality images even at 0.5 lux. It has an S-mount(M12) lens holder which allows customers to change the lens according to their requirement.

This camera can be directly connected to camera connector(J22) on the NVIDIA® Jetson TX1 Development Kit. e-CAM30_CUTX1 is exposed as a standard V4L2 device and customers can use the V4L2 APIs to access this camera and control the same.

e-CAM30_CUTX1 streams (Full HD) 1080p@30ps, HD (720p)@ 30fps and 3.4MP @30fps.

Deeper into board

It houses  high performance, small form factor, 3.4 MP pluggable Low Light Camera Module with S-Mount lens holder. It is based on AR0330 – a 3.4MP CMOS Image sensor from ON Semiconductor.

It has a dedicated, high-performance Image Signal Processor chip (ISP) on-board that performs the entire Auto functions (Auto White Balance, Auto Exposure control) in addition to complete image signal processing pipeline that provides best-in-class images, videos and the optional MJPEG compressions.

Size of board : 75.03 mm x 40.18 mm x 25.6 mm (without Lens)

Board Weight – 20 Grams (without lens)
25 Grams (with lens)

Camera Features
  • Sensor:1/3″ Optical format CMOS Image sensor.
  • Focus Type:Fixed focus
  • Resolution:3.4 MP
  • Pixel size:2.2 µm x2.2 µm
  • Sensor Active Area:2304H x 1536V
  • Responsivity:2 V/lux-sec
  • SNR:39 dB
  • Dynamic Range:69.5 dB
  • Output Format:Uncompressed YUV422 format
  • Shutter type:Electronic Rolling Shutter
  • Holder:S-Mount
  • ISP:External ISP
  • Array Size:The e-CAM30_CUTX1 supports only up to 2304×1536 pixels for 3.4 MP
 Applications

e-con Systems has pioneered in bringing out various cameras for NVIDIA Jetson kit. They have already launched few cameras for Jetson TK1 and Jetson TX1. Now , they are happy to launch new e-CAM30_CUTX1 ready-to-deploy camera solutions for NVIDIA Tegra X1 platform for applications such as Building Drones, Autonomous Robotic Systems, Mobile Medical Imaging, Intelligent Video Analytics, Unmanned Aerial Vehicles etc.

e-CAM30_CUTX1 Utilities 

Linux Camera Driver source code can be ported to any NVIDIA Tegra X1 platform and even to support the secondary MIPI CSI-2 interface of Tegra X1.

Read more about the e-Con systems 13MP Camera board here

watch demo at https://www.youtube.com/watch?v=hW6fejsWpBA

 

Share with your friendsShare on FacebookShare on Google+Tweet about this on TwitterShare on LinkedInPin on PinterestShare on RedditShare on StumbleUpon

2 Thoughts to “e-CAM30_CUTX1 – 3.4 MP NVIDIA Jetson TX1 Camera Board”

  1. Great article, Thanks for your great information, the content is quiet interesting. I will be waiting for your next post.

Leave a Comment